State of the Art, Inc. - High Value Thick Film Resistors

JEDEC PACKAGES

Size Code	Length	Width	Thickness	I/O Count	Watts Per Resistor*	Watts Per Package	Max Voltage
SJCA	.300	.300	0.030	16	0.05-0.10	0.08	50
SJCB	.350	.350	0.030	20	0.05-0.10	1.0	50

Nominal measurements are in inches.
ROHS compliance information may be found here.

SLAMDIP PACKAGES

Size Code	Length	Width	Thickness	I/O Count	Watts Per Resistor*	Watts Per Package	Max Voltage
SD15	.150	.410	0.030	16	0.05-0.10	0.8	50
SD20	.200	.410	0.030	16	0.05-0.10	0.8	50

Nominal measurements are in inches.
ROHS compliance information may be found here.

State of the Art, Inc. (SOTA) manufactures leadless surface mount resistor networks using thick film technology on 96% alumina. Available in JEDEC and SLAMDIP styles, SOTA's networks provide outstanding performance in a high density package. The leadless monolithic construction using slotted wraparounds provides number of benefits including a superior solder joint when attached to the circuit board, reduced head height, a smaller footprint, and superior heat dissipation. SOTA's networks are available in three different grades, Standard, High Reliability, and MIL-PRF-914.

Networks are available with standard resistance values from 10 to 2.2M in MIL-PRF-914 versions, and from 5 to 10M in Standard and High reliability versions. All resistors in the package have the same value, but custom designs can be produced that allow different values in the same package. Standard tolerances are + 1%, 2%, 5%, and 10%. Standard TCRs for the networks are + 100, 200, and 300 ppm.

The Standard and High Reliability grade networks are available in four sizes and two schematic configurations. For high reliability applications, SOTA can provide screening and testing for all sizes and styles of the surface mount networks. The standard high reliability screening and testing is same as MIL-PRF-914, but custom testing tailored to meet your requirements can be provided.